insuf Computer

Monday, September 30, 2013

MXKEY v3.5 revision 1.2, Public-Release

MXKEY v3.5 revision 1.2, Public-Release

0 comments
Partial fix:
- NK
  bugfixed, SL3 read PhoneIDs shows 'Operations not supported'
________________________________
v3.5 revision 1.2, Public-Release
- MAIN
  Added, Files synchronization feature
   Allows to check and update important files with server without installing full setup.
   Also usefull to minimize problems because of users patch.
  Fixed, Access violation on XP for PC without HTI(WinUsb) installed
  Check For updates and Signle module update removed(replaced with Synchronize Files)
- NK(Nokia Service Tool)
  Added, optional SX5 serial used for SL3 NCK calc (*)
  Added, Latest flash update definition to setup
  Added, Options to disable/enable RAPIDO new protocol for USB flashing
  Added, Options to disable/enable embedded SBL for XGOLD flashing
  Added, HTI SoftTMA Resistor selection (*)
  Added, Local storage definition for DCC and RFBB data.
  Added, DCC data verify after write
  Improved, DCC data write (If DCC write fail, DATA will be written as PM)
  Fixed, Download in background deadlock bug
  Fixed, PM erase bug (was early stoped on newer BB5 phone)
  Fixed, DCT4 flashing
  Fixed, New ProductProfile write

MXKEY MXBOX UPDATE v3.5 revision 1.0

0 comments

v3.5 revision 1.0, Public-Release

What's new on MXKEY UPDATE

MAIN
  • - Update HTI button now always enabled.
  • - Added local ping check for 'Server List'
  • - Added taskbar progress support for Windows 7

(Nokia Service Tool)
  • - Fully reworked flashing routines(workaround for HTI flashing bug)
  • - HTIBOX connected as additional security service(if any) when using USB connection for standalone BB5 security fix operation
  • - Fixed, Access violation on DCT4 Bus check when card connected HTI CCID reader
  • - Fixed, Download in background task
  • - BB5 Secure Storage and Certificate validation moved to Certificate manager page
  • - BB5 Secure Storage, Certificate validation, Recover CERT, Load RFBB from server also supported with USB connection
  • - Minor bug fixes


How To Update your MXBOX (HTI)

0 comments
Please read this update carefully step by step!

 1. First step open mobileEx 3.5 then click update button

MXBOX v3.5 revision 0.0 New Update Realese

0 comments

MXBOX HTI (High Tech Interface) NOKIA FLASHER
STANDALONE SX4AUTH, SD REPAIR, SIMLOCK REPAIR,
NCK CALC, SL3 HASH CALC and SL3 NCK CALC

MobileEx / MXBOX v3.5 revision 0.0

CHANGES:
MAIN

- Introduced HTI Firmware version 00.08
- HTI firmware update routine implemented.

- Added, visual detail when MXKEY plugged to HTICCID.

(Nokia Service Tool)
- Added, STANDALONE security repair function for all hash for RAPUYAMA,RAPIDO,RAP3Gv4 phones.
(required HTI with firmware 00.08 - please update your HTI BOX)
  • * SX4AUTH (PA_SL/PA_SL2/PA_SL3/PA_SIMLOC30)
  • * SL3 BF HASH CALC (PA_SL3/PA_SIMLOC30)
  • * SD REPAIR (PA_SL/PA_SL2/PA_SL3/PA_SIMLOC30)
  • * NCK CALC (PA_SL/PA_SL2)
  • * SL3 NCK CALC (PA_SL3)

HOW TO INSTALL MXBOX HTI:
  • Unplug another box except mxbox
  • Download mobileEx3.5patched_hti_rescue.rar
  • Extract this downloaded file into your C:\mobileEx\3.5 directory, replace your current exe.
  • Remove MXKEY smart card from HTI device, put it into your old card reader (MXKEY dongle).
  • Repeat update operation, use the same way to update your mxkey by server.

For further step by step with picture click here

DOWNLOAD MXBOX v3.5 revision 0.0
MobileEx3.5_exe_patched_hti_rescue.zip MEDIAFIRE

mobileEx_setup_v3.5_rev0.0_20110513_Setup.exe ifile.it
mobileEx_setup_v3.5_rev0.0_20110513_Setup.exe mediafire.com

 NEW UPDATE FOR HTI USER
MxBox_HTI_Firmware Updater_v3.5_rev0.3


 

For public disscusion thread visit :forum.gsmhosting.com

MXBOX v3.4 revision 3.1 BB5 HASH patch update

0 comments
 What's New:
  • Added FREE (NO CREDITS AND NO INTERNET) SD REPAIR for All RAPUYAMAbased phone for MXBOX/HTI.
  • Added FREE (NO CREDITS AND NO INTERNET)
    SX4AUTH for All RAPUYAMA based phone for MXBOX/HTI.

  • Added FREE (NO CREDITS AND NO INTERNET)
    FULL RPL BACKUP for All RAPUYAMA based phone for MXBOX/HTI.
  • Added FREE (NO CREDITS AND NO INTERNET)
    SL3 BF HASH CALC for All RAPUYAMA based phone for MXBOX/HTI.
- ALL HASHES Supported
- Fixed, Manual erase address selection.
- Minor bug fixes

Free RPL With New MX KEY

0 comments
Free RPL MKEY v3.3 rev1.2

Anda harus punya koneksi ke Internet untuk melakukan ini
Buka Mxkey v3.3 rev 1.2..
Jangan dulu melakukan koneksi MXKEY dengan box apa pun
1. Pilih tab option
2. Server
3. Klik Server list >
4 .Klik pada support, pilih #1 atau support #2 di support server area
5. Klik goto support akan langsung masuk ke web mxkey
6. Klik Reset Password
7. Password akan tampil diatas
8. Koneksikan MXKEY dengan Box favorite anda (UFSx)..
9. Pilih Nokia Service Tools
10.Klik Tab 'Service'
11. Klik Online Logger lalu Klik 'Imei & Security'
12. Masukan Password yang dari situs MXKEY
13. Login dan lihat hasilnya
14. Klik 'Do Selected Job' untuk mulai calculate RPL
SELESAI.
Semoga Beruntung


You must have a connection to the Internet to do thisOpen MXKEY v3.3 rev 1.2 ..Do not connect to any interface1. Select the option2. Server3. ">Click the Server list>4. Click on support, select # 1 or # 2 in the support server support areas5. Click goto support will directly your browser to the MXKEY support site6. Click Reset Password7. The password will be appear above8. Connect MXKEY with your favorite Box (UFSx) ..9. Select 'Nokia Service Tools'10.Klik Tab 'Service'11. Click Online Logger then click 'Imei & Security'12. Enter the password from MXKEY site
13. Login and see the results14. Click 'Do Selected Job to' begin calculate RPL (Phone must be connected to the box!)DONE.
Good luck







Mxkey update v3.3 revision 1.2, Public-Release

0 comments

v3.3 revision 1.2, Public-Release

MAIN
- Improved, interface communication routine (more stable)
- Fixed, socket/internet communication bug for some pc(AMD bug)
- Fixed, failed re-load module
- Fixed, registration bug

NOKIA
- DCT4/DCT4+ RPL FREE to all MX-KEY users (support all ASICs)
- Fixed, NFP extract
- Fixed, WD2 flashing (UFS)
- Minor bug fixes

PS: credits will be used in future for other nice services from MX-KEY Team.

Download from:
MX-KEY - Official mirror
http://rapidshare.com/users/P5JHS5
also available in support area and download page

mobileEx_setup_v3.3_rev1.2_20100121_.exe 21.98 MB
mobileEx_setup_v3.3_rev1.1_20100115_.exe
22.18 MB


Buy only from MX-KEY authorized resellers:
http://forum.gsmhosting.com/vbb/showthread.php?t=686432


MX-KEY v3.3 revision 1.2 public discussion thread:
http://forum.gsmhosting.com/vbb/showthread.php?t=907249


MX-KEY official web sites:
International - http://www.mx-key.com (in construction)
Indonesia - http://id.mxkey.biz/
India - http://www.mx-key.in

BR,
Manole

MX KEY v3.2 revision 5.6, Public-Release

0 comments
05/11/09
MX-KEY
v3.2 revision 5.6, Public-Release
#Minor update
- MAIN
Added, Application Signing system
~ This is new application security improvement
~ Application will check it signatures when needed, this will check unique card id, application version, and signature datetime validity
~ New created signature will be valid for next 6 month after signing
~ It means that after new update, you might need to 'Sign Application' if the current signature doesnt meet the requirement.
~ Before signing request, sw will set system datetime from ntp server if datetime is not correct.
~ Note: Make sure you have set you computer date,time.
~ The application signing system will not work on the computer with invalid date time !
Removed, Ping on server check
Fixed, Windows Vista SP2 compability.
- NK
Added, BB5 RAPU USB Flashing(spesially for new Flash)
Added, Dynamic Camera Configuration upload
~ This features located at 'Phone Test->Camera'
Added, TIKU CDMA Product Data (PREPAID_CS_TYPE) fix using server calculation
~ This features will consume credit, how much it will take will be displayed once you logged in using 'Dongle Id'
~ The Service tag is 'DCT4 IMEI+PRODUCT DATA'
Added, BB5 RAP3NAND Erase User Area in the 'Quick Fix' tab
~ Usefull to fix BLANK/BLINK or doesnt switch on problem.
Added, BB5 PA_SL identification from PASUBTOC
Added, New CS type info for newer phone
Improved, FAST flash routine
~ SW will keep in flash mode when processing image file, means that it will skip boot and loader upload if config from each file is similiar.
Improved, BB5 RPL write
~ SIMLOCK_DATA will be uploaded after NPC write, since new BB5 phone will only accept SIMLOCK_DATA if NPC is valid !
Fixed, BB5 'Security block invalid' bug
Added, Detailed information for each 'Quick Fix' function.

DOWNLOAD
mobileEx_setup_v3.2_rev5.6 Size: 22320 KB

mobileEx_setup_v3.2_rev5.6_partial_fix.exe Size: 1806 KB

No comments:

Post a Comment

Insuf Sarver System

Insuf Sarver System
Insuf Sarver System

Earn money more and more!!!!!!